E-Fast New Design 3 Stage Pulse Repair 12V 6A Lead acid Battery Charger
Product Description
Product Name |
Car Battery Charger 12V 6A |
Material |
ABS |
Protection |
Short Circuit Protection, Over-charging, Overcurrent, Overvoltage |
Function |
Battery charger, Standard Battery, Motorcycle Battery, Car battery |
Output Power |
75W |
Brand |
E-FAST |
Model Number |
ZYX-J10 |
Use For |
Motorcycle Car |
Rated output |
12V 6A |
Input voltage |
100-240VAC,50-60HZ |
Weight |
580g |
Charging Steps:
(1) detect the state of the battery before charging, the output alligator clips on both ends of the battery, red positive and black negative, with LCD display data (power on 6S self-test, 6S after the temperature and voltage cycle display, self-test before the display temperature), this step must ensure that AC power is not connected, only AC power disconnected before operation.
(2) thecharger AC input line into the plug, and then open the plug switch.
(3) mode selection (if the key after 30S self-locking, please remove any alligator clips, with LCD display OFF, key unlock,confirm good mode, clip on the alligator clips), and then charging.
(4) When the charger shows "FUL" or "End", it means that the charging or repair mode is over, disconnect the AC input at this time and observe the battery capacity status after 10S (LCD cycle shows voltage and temperature, the power grid shows the current battery capacity),confirm full, disconnect the alligator clips from the battery.
Product Protection Function:
(1) Output short circuit and anti reverse connection:
Battery Charger has a prompt for output short circuit and reverse connection of the battery (reverse connection 1-2S detection, when reverse connection or short circuit is detected, the LCD displays "ERO", and the product will not be damaged due to reverse connection or short circuit during the detection process), and during reverse connection, there will be no reverse connection spark phenomenon after processing by a microprocessor program.
(2) Battery power detection:
Without connecting to the AC input voltage, the battery clip is sandwiched between the positive and negative electrodes of the battery (red, positive, black, negative), and the current and voltage parameters of the battery can be displayed (digital tube display data: voltage and ambient temperature cycle display, the power grid is displayed in percentage form based on the detected data, the first power on 6S self check wait, 6S not reached only display temperature, 6S reached temperature and voltage cycle display).
(3) Winter/Summer Mode:
During the charging process, detect the ambient temperature, adjust the charging state of the product in a timely manner, and ensure battery life and charging safety. Winter Mode: LCD displays snowflakes, Summer Mode: LCD displays the sun (unique to car mode, not available in other modes).
(4) Over temperature protection:
Battery Charger has an over temperature protection function. If the product detects excessive temperature, it will automatically start the over temperature protection program. When the temperature returns to normal, the initial charging state will be restored.
(5) Overcharge protection:
Battery Charger has an overcharge protection function to prevent overcharge from reducing the battery life and enhancing the reliability of charging safety (the maximum charging duration is 15.5-16.0H by default).
(6) Battery charging progress bar:
The charging progress bar is displayed during the charging process of the product, in the form of a percentage, and the full charge display is 100%.
(7) LCD display status:
a: Full state: LCD displays "FUL".
b: Clip disconnection mode: LCD displays "OFF".
c: Fault mode: LCD displays "ERO".
e: Charging state: LCD circularly displays voltage, current, and charging progress.
f: Repair mode: LCD displays "PUL", and the repair icon flashes.
h: Repair completed: LCD display "FUL" repair icon is always on.
g: Detect battery power: LCD cycle displays voltage, and battery power is displayed as a percentage.
Company Profile
Certifications
Our Advantages:
1.10+ Years Experience,Quick Respond, Fast Shipping.
2. Factory directly, Massive Stock, lead time 0-3 days.
3. We can send free samples for customers to check the effect and quality.
4. Provide good sale service like tracking number, mass production pictures.
5. Quality Assurance,good price,stable supply.
6. One-stop purchasing service.
FAQ
Q1: Can I get a sample?
A:Of course, but you may need to pay sample charge which will be returned after any order signed. Some stock sample will be free for you!
Q2: Are you a factory or trading company?
A:We are a factory with more than 10 years experience in producing rechargeable battery and battery charger .
Q3: Do you accept OEM and ODM service?
A:Yes, we accept OEM and ODM service.
Q4: What is your main market?
A: Southeast Asia, Middle East, Africa, North America, Europe and many other countries and regions.
Q5:What certificates your products have?
A:Most of our products have CE FCC Rohs etc. Don't worry about the quality!
Q6:Do you have own R & D team in your factory?
A:Yes,we have our own R & D and technical teams,they will update the products regularly and can help clients to solve the technical problems immediately.
Q7:Why it seems your price a little lower than other suppliers?
A:We are the real factory shipments, no middlemen to earn the price difference.