Product Description
Hot products fully intelligent LCD screen car agm lifepo4 battery charger automatic lead acid battery charger 12v 10a 24v 5a
1.Product parameters
Brand Name: |
E-FAST |
Model Number: |
ZYX-J50 |
Input voltage and current: |
100-240VAC,50-60HZ |
Power |
140W |
output voltage and current: |
12V/10A; 24V/5A |
Battery Range |
6AH-180AH |
Battery Type |
12V 24V Lead-Acid battery;Lithium battery;LiFePo4;AGM GEL WET Battery |
Color |
Red;Yellow |
Material |
ABS |
Dimension |
170*110*65mm |
Weight |
0.58KG |
Applications |
Truck; Vehicle; Scooter;Motorcycle;Car with12v 24v lithium LiFePo4 lead-acid battery |
Certification |
CE;PsE;RoHS;FCC;UKCA |
Protection |
-Polarity protection
-Output short protection
-Short circuit protection
-Overvoltage protection -Overcurrent protection -Overheating protection -Reverse connection protection |
Plug |
AU/EU/UK/US/JP |
Efficiency |
85% |
2.Product Function
(1) output short-circuit, anti-reverse connection: the product has an output short-circuit, reverse battery prompt (reverse connection 1-2S detection, detection of reverse connection reverse connection or short circuit when the LCD display "ERO", the detection process will not cause damage to the product because of reverse connection or short circuit), and reverse connection, after the microprocessor program processing, there will be no reverse connection sparking phenomenon occurs;
(2) charging overcurrent warning: when charging the battery, if the battery is abnormal, resulting in charging voltage is too low, when the charging current is greater than 13A or more, will trigger the under-voltage alarm (LCD display "LOU"), at this time will automatically disconnect the charge to protect the battery and its charger, to avoid abnormal conditions
(3) Charging memory function: the product has a charging function memory mode, the product power-on mode defaults to the state mode used before the last power-down
(4) seven-stage charging: the product has seven-stage charging function (seven stages are: desulfuration, trickle charging, constant current charging, constant voltage charging, battery power detection (detection stage only shows voltage and temperature, and power grid special effects and repair mode consistent), compensation charging, float charging), charging curve as follows:
Note1:Motorcycle battery mode only 6-stage charging (except for desulfuration)
Note2: LiFePO4 battery mode only 5-stage charging (except for desulfuration, float charging)
(5) battery power detection: no access to AC input voltage, battery clamps clamped on the positive and negative ends of the battery (red positive black negative), you can display the battery current and voltage parameters (digital tube display data: voltage and ambient temperature cycle display, power grid according to the detected data in the form of a percentage display, the first power 6S self-test waiting, 6S not to display only the temperature, 6S to reach the temperature and voltage cycle display)
(6) winter and summer mode: during the charging process, detect the ambient temperature, timely adjustment of the product charging state to ensure battery life and charging safety, winter mode: LCD display snowflakes, summer mode: LCD display sun
(7) over-temperature protection: the product has over-temperature protection function, the product detects the temperature is too high, will start the over-temperature protection program, when the temperature returns to normal values, restore the initial charging state
(8) Overcharge protection: the product has an overcharge protection function to avoid overcharging resulting in a decline in battery life and to enhance the reliability of charging safety (maximum charging time default 15.5-16.0H)
(9) Charging voltage self-test: automatic self-test after the battery is charged, without artificial switching, the self-test passes into the floating charge, and vice versa into the compensation charge, the compensation charge is completed into the floating charge
(10) key anti-mistrigger: product key release mis-trigger, product charging start timing, 30S after the key self-locking, can not be triggered, clip off to unlock the key (AC no input, clip clip in the battery no-load self-test state, the key locked, access to AC input voltage to unlock)
(11) LCD display status:
a: full state: LCD display "FUL", power grid "100%"
b: clip disconnect mode: LCD display "OFF", power grid empty, power grid border 1hz flashing
c: fault mode: LCD display "ERO", power grid 1Hz flashing
d: Over current protection: LCD display "LOU", power grid 1Hz flashing
e: Charging status: LCD cycle display voltage, current, temperature, power grid "charging effect display"
f: repair mode: LCD display "PUL", power grid "repair effect display", repair icon flashing
h: repair end: LCD display "End", power grid full charge
g: no-load battery detection: LCD cycle display voltage, temperature, power grid according to the battery power in the form of percentage display
(12) Seven-segment meteor indicator (face sticker)
a:DES:Desulfuration stage
b: SS: trickle charging stage
c: CC: constant current charging stage
d:CV:Constant voltage charging stage
e: TET: charging full charge self-test stage
f: REC: Battery compensation charging stage
g: FUL: Float charging stage
3.Product function mode selection
(1) AGM battery charging mode
a: Charging current: Imax: 10A@DC12V mode; 5A@DC24V mode
b: Charging voltage: DC14.6V@DC12V mode; DC29.2V@DC24V mode
c: Battery type: DC12V-24V AGM lead-acid battery
d: Maximum single charge time tmax: 15-16H
(2) Standard mode of automotive battery
a: Charging current: Imax: 10A@DC12V mode; 5A@DC24V mode
b: Charging voltage: DC14.4-14.9 V@DC12V mode; DC29.2-30V@DC24V mode (intelligent control of winter and summer modes)
c: Battery type: DC12V-24V lead-acid battery
d: Maximum single charge time tmax: 15-16H
(3) Motorcycle charging mode
a: Charging current: Imax: 1.5A@DC12V mode; 1.5A@DC24V mode
b: Charging voltage: DC14.6V@DC12V mode; DC29.2V@DC24V mode
c: Battery type: DC12V-24V lead-acid battery
d: maximum single charge time tmax: 15-16H (maximum single charge capacity 85-95AH)
e: No floating charge
(4) Charging mode of LiFePO4 battery
a: Charging current: Imax: 10A@DC12V mode; 5A@DC24V mode
b: Charging voltage: DC14.6V@DC12V mode; DC29.2V@DC24V mode
c: Battery type: DC12V-24V AGM lead-acid battery
d: Maximum single charge time tmax: 15-16H
e: no desulfuration, no float charging
(5) Lead-acid battery repair mode
a: repair principle: positive pulse voltage repair mode
b: Repair voltage: DC14.6V@DC12V mode; DC29.2V@DC24V mode
c: battery type: lead-acid type battery
d: repair maximum time tmax: 15-16H
Detailed Photos
Charging stepsChar
Packaging & Shipping
Package specification: 20/30pcs/Carton
Color Box size: 23*13.5*7.5cm
Delivery Detail: sample within 7 work days,15~25 days for bulk order
Company Profile
Tianchang Zhiyun Electronic Technology Co., Ltd
Professional battery charger manufacturer
Tianchang Zhiyun Electronic Technology Co.,Ltd.,is a technological innovation enterprise specializing in the research and development, production, and sales of electronic products such as battery chargers, power supplies, etc. The company is located in Tianchang City, Anhui Province,covering an area of 1000 square meters,having a variety of advanced production equipment.
The company's independent flagship brand E-FAST has multiple models of products, including ZYX-J10 (12V6A); ZYX-J20(12V7A); ZYX-J30 (12V8A 24V4A);ZYX-J40(12V6A 24V3A); ZYX-J50(12V10A24V5A);ZYX-J99(6V/12V2A); TK100(batteryTester);TK300(12V6A); TK400(12V6A); TK500(12V12A 24V6A); TK700 (12V10A 24V5A), mainly suitable for lithium batteries, lead-acid batteries, AGM and GEL batteries, WET batteries,Start stop batteries,etc.
The company also has 36V 48V 60V 64V 72V 84V 96V 12AH 20AH 32AH 38AH 45AH 52AH and other models of lead-acid battery chargers for electric vehicles, electric bicycles, Car,motorcycles, and scooters.
In addition, the company has ternary lithium batteries and iron lithium battery chargers of models such as 24V, 36V, 48V, 60V, 72V, 2A, 3A, 5A, 10A, 12A, 15A, 18A, 30A, 20-30A, 25-35A, 40-60A, etc.
In short, we can offer various types of battery chargers with a wide range of coverage. I specialize in wholesale and can provide you with a variety of customized services, including product appearance, colors, and logos. If the customer chooses us, we promise that you will enjoy preferential policies such as minimum order quantity, free samples and large discounts.
FAQ
Q1: Can I get a sample?
A:Of course, but you may need to pay sample charge which will be returned after any order signed. Some stock sample will be free for you!
Q2: Are you a factory or trading company?
A:We are a factory with more than 10 years experience in producing rechargeable battery and battery charger .
Q3: Do you accept OEM and ODM service?
A:Yes, we accept OEM and ODM service.
Q4: What is your main market?
A: Southeast Asia, Middle East, Africa, North America, Europe and many other countries and regions.
Q5:What certificates your products have?
A:Most of our products have CE FCC BQB etc. Don't worry about the quality!
Q6:Do you have own R & D team in your factory?
A:Yes,we have our own R & D and technical teams,they will update the products regularly and can help clients to solve the
technical problems immediately.
Q7:Why it seems your price a little lower than other suppliers?
A:We are the real factory shipments, no middlemen to earn the price difference.